Jiangyin Huju Metallurgical Equipment Co., Ltd.

current location:Home » Product Center » Huju double around the baler

Huju double around the baler

Product classification： Automatic strapping machine

Brief introduction

HJLS-420 / 6.5: It is mainly applied to the packing of small bar. The machine uses the high-wire hot-rolled wire rod Q195 with diameter of 6.5mm as the strapping packing belt, which has the characteristics of high safety, high efficiency, tightening force, good kink quality, low failure and low maintenance cost. Comprehensive performance indicators in the industry-leading level.
First, the performance indicators:
1, bundle diameter range: Φ100 ~ Φ420
2, packing weight: 1500KG-5000KG
3, packing shape: round
4, for steel specifications: rebar, (Φ10 ~ 180) round steel
5, packing object temperature: ≤ 600 ℃
6, wire material and specifications: Q195, specifications Φ6.5 hot-rolled wire rod.
7, Binding mode: double around, single knot
8, tied wire twist angle: 630 °.
9, single-channel bundled time: <15 seconds.
10, the working environment temperature: -10 ℃ -40 ℃
11, control: manual and automatic. Interlocking with the production line communication.
12, equipment weight: ~ 5 tons.
13, power: three-phase four-wire AC380V + PE 50HZ
14, the total installed capacity: 17KW.
15, the device dimensions: 4200x1250x2050.
16, the failure rate: <0.3%
Second, the technical characteristics that
(1) If the bundles are not tight, the products are easy to be bundled during the hoisting and transportation. The tightening method of the cylinder is adopted by the Company, so the tightening force of the binding is greatly improved. Tight and round.
(2) The company after the completion of the rod in the kink, an increase of the film device, reducing the degree of kink and equipment hanging touch, kink quality.
(3) The wire feeding mechanism can adjust and control the oil cylinder, and it is more simple and convenient to wear the wire. The wire rod conveying adopts the double wheel structure, which increases the wrapping angle and the wire rod conveying is more stable.
(4) The thread guide groove has been improved and the guide angle of the interface is increased. The guide groove is ensured by the integral processing way of the guide groove; the guide wheel on the guide groove adopts the structure of suspension installation, Metal can automatically flow out; Therefore, an effective solution to the problem of wire rod blocking to ensure that the wire rod transport more fluid.
(5) whether the wire rod in place, at home and abroad are generally used indirect testing methods, sometimes because of the quality of the wire rod is not good or slippery and other reasons, affecting the detection reliability. The company uses a unique wire rod in place direct detection of patented technology, direct detection of wire rod, the detection is extremely accurate and reliable, effective solution to the resulting bundles of failure, automatic bundling work more stable.
(6) a good structural design and manufacturing process to ensure that the use of optimized detection and control technology, so that Hu Ju automatic strapping strapping more smoothly, its faster and more efficient.
(7) hydraulic system using air-cooled, on-site without water. The hydraulic pipe are installed by card sets, hydraulic cylinder seals are imported seal to ensure that the hydraulic system is reliable, to the hydraulic system without leakage.
(8) The company automatically bundles the machine to install simply, only needs the user to provide 380V three power connections then.

Product Center

Email：info@jyhuju.com 　　　　yegang@jyhuju.com

Huju double around the baler

Binding Machine

Chamfering machine

Palletizer

VD furnace

Tightening machine

Finishing line

Furnace equipment

Cooling bed

Hot, cold saw